10
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
6.2. Installation of VTC type evacuated-
tube collectors.
Evacuated tube collectors are mounted
placing the manifold on the top and the
rubber protectors in the bottom part.
Such collectors have vertical orientation.
Diagram 13
Collectors VTC type
are mounted on specially designed support systems, adapted to
different roof slopes.
Diagram 14
6.2.1. Flat roof VTC type collector
installation
Diagram 15
Installation is carried out by at least two
people.
We recommend consulting with a roofing
expert.
Fix the support onto the roof as indicated
in the Collector Support Installation
Instructions. Adjust the support angle as
needed.
Onto the support stand mount the
collector frame with manifold and pipe
holders. Fix the collector to support
using the clamping clips. Make sure all
connections are properly secured and
will not come loose under harsh weather
conditions.
Evacuated tubes are installed last, after
the system has been connected and
tested for leakage.