11
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
6.2.2. Inclined roof VTC type collector
installation
Diagram 16
Installation is carried out by at least two
people.
We recommend consulting with a roofing
expert.
B
G
K
Diagram 17
Step 1.
Install the four fixing straps B to
the roof using the screws G. /Diagram 17/
Step 2.
Put alongside and parallel to each
other the two side rails F.
For each rail put two silicone pads K, in
places where the bar rests on the roof tile.
Install the two side rails F to fixing straps
B. Use the screws and therefore provided
orifices in the rails. /Diagram 17/
Step 3.
At the bottom of both side rails
F insert bottom rail H and in the top
part - the VTC collector manifold A. Both
collector manifold A and bottom rail H
must lay perpendicular to the side rails
F. Fixation orifices of collector manifold A
and bottom rail H should match the side
rails F, while observing the correct weight
distribution scheme.
Fix A and H to side rails F using two
clamping clips C for each.
In this way the collector framework is
composed.
/Diagram 18/
K
A
C
F
H
Diagram 18
