7
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
Table 1
РК
type Collector
VTC type Collector
Check whether protective glazing is
intact
Check to assure that evacuated tubes are all intact and the
bottom of each tube is still silver-colored. If a tube has a
white clear bottom, that means it is damaged and should
be replaced. As soon as the evacuated tubes are removed
from the box, please put on the rubber tube caps, found
inside the manifold box. This will protect the bottom tip of
the glass tube from breaking on impact
Both outlets of Manifold pipe wear
plastic protectors. Remove inlet/
outlet pipe plastic protectors before
collector connection to system.
Both outlets of Manifold pipe are fit with plastic
protectors. Remove inlet/outlet pipe plastic protectors
before connecting collectors to system.
Before installing PK type collectors,
remove the protective plastic cor-
ners from collector frames.
Do not take out or expose the tubes to sunlight during in-
stallation, otherwise the inner tube and heat transfer fin
will become very hot.
Delivery includes:
1) PK type Collector or VTC type Collector.
2
) Technical passport. User manual.
3) Warranty card
If any of the above items are missing,
contact your supplier.
It may be necessary to purchase bolts
or other fasteners to suit the installation
surface.
Delivery of collector PK type includes:
Flat-plate collector
PK Standard CL
or Flat-
plate collector PK Select CL
Delivery of Evacuated-tube collector VTC type includes:
Diagram 8
А - Manifold – 1pc.
G - Wood screws – 4 pcs.
В - Mounting sheet(plate) – 4 pcs.
H - Bottom track – 1 pc.
C - Press pad – 4 pcs.
J - Bolts – 13 pcs.
D - Тube holder – 15/20/30 pcs.
K - Silicon pad – 4 pcs.
E - Heat conduction glue – 1 pc
M - Heat pipe vacuum tube – 15/20/30 pcs.
F - Front track – 2 pcs.
