Control
Flag Tag
Label
Power Cord
Module
Foot zone
Body Zone
Control Cord
Connector
Left Body Zone
Right Body Zone
Left Foot Zone
Right Foot Zone
Power Cord
Control
Control
Control Cord
Connector
Module 1
Module 2
Label
Flag Tag
Flag Tag
E6
For questions or support, please visit www.sunbeambedding.com.
E7
For questions or support, please visit www.sunbeambedding.com.
1 Place the heated blanket on the bed with the label at the foot of the bed facing upward.
2 Connect the cord into the module at the bottom of the heated blanket until the plastic hinges click
into place.
CAUTION:
Cord must be COMPLETELY CONNECTED. A risk of fire could result from a loose connection.
3 Run the control cord on the floor under the bed. Do not sandwich cord between the mattress and box
spring. Avoid any tangling or pinching.
4 Plug power cord into a 110-120 volt wall outlet.
CAUTION:
Do not use with generator power or inverter.
Control Placement:
• Dual Control for heated blanket or mattress pad
– place primary control (label on back of
control) on the right side of the bed.
Cozy Feet Heated Blanket Set Up
See Control Features on page 7
for your individual control.
If there is a flashing light or your control displays
a flashing “FC”, “FF”, or “FP” see page 10.
• Single Control for heated blanket or mattress pad
–
the control can be placed on either side of the bed.
STEP
1
Place on bed with
label at foot of bed
facing out
STEP
2
Connect the Control
Cord connector and
module securely
STEP
3
Run Control Cord
under the bed
STEP
4
Plug Power Cord
into wall
STEP
1
Place on bed with
label at foot of bed
facing out
STEP
2
Connect the Control
Cord connector and
module securely
STEP
3
Run Control Cord
under the bed
STEP
4
Plug Power Cord
into wall
Control Features
Selectable Auto-Off Feature:
The “Auto-Off” feature is designed for conservation of energy by automatically
turning your blanket off after 10 hours of continuous use. The “Auto-Off” function is active by default, and
the product will automatically turn off after 10 hours. To keep the blanket on longer than 10 hours, press the
“Auto-Off” button so the LED light turns off, and the blanket will remain heated.
Body and Foot Controls:
The Body and Foot zones operate independently of each other. You can adjust the heat settings in each zone
to your desired temperature. The Foot zone has settings up to level 15, and the Body zone has settings up to
level 10.
For Queen/King Dual Controls:
Two controllers are included in the Queen and King sized blankets. Both the right and left side have separate
Body and Foot zones. Each user can adjust the heat setting they prefer in the Body and Foot zones.
To restart all heated products after a power failure:
Press the power button and the heated product will begin to warm.
Preheat Feature:
The preheat function will heat the bed for a period of 30 minutes and the control will return to its original
setting.
1 To use the preheat feature, simply turn on the warming product by pressing the “On/Off” button and
then press the “Preheat” button. The display will show “PH” while the function is activated.
2 To reset the preheat feature, simply turn off the control by pressing the “On/Off” button and then turn it
back on by pressing the “On/Off” button.
Using Your Control:
1 To turn the control on, press the “On/Off” button.
2 Press the buttons with “+” sign to raise the heat settings in body and foot zones to your desired heat
level.
NOTE:
Start off with a lower heat setting in order to adjust to the warmth
3 Press the buttons with “-” to lower the heat settings in the body and foot zones to your desired heat
level.
NOTE:
Controller will show a dash (--) across the screen to indicate the heat is turned off in that
specific zone.
4 To turn the heated blanket/mattress pad OFF, press the “On/Off” button.
CAUTION:
ALWAYS turn the heated blanket/mattress pad “OFF” when not in use.
Body
Feet
Pre-Heat
Auto-Off
Body
Feet
10
15
How to Use Your Controller
Decrease Body Zone
Heat Setting
Decrease Feet Zone Setting
Preheat Control
Increase Body Zone Heat Setting
Increase Feet Zone Heat Setting
Auto-Off Control
On/Off Control
Comet IB_20ESM1.indd 6-7
Comet IB_20ESM1.indd 6-7
3/13/20 10:52
3/13/20 10:52
