background image

2

 

SAFETY PRECAUTIONS FOR YOUR SUNBEAM 
FOOD PROCESSOR LC9600Z.

•  Always use extreme care when handling blades and 

cutting discs. These are extremely sharp and may 
cause injury if handled incorrectly. Always store 
blades and cutting discs in their respective covers 
or processing containers.

•  Unplug from power outlet when not in use, before 

putting on or taking off attachments, and before 
cleaning.

•  Do not put hot liquids into the processing bowl. 

Cool to room temperature before placing in 
processing bowl.

•  Avoid contacting moving parts at all times.
•  Place the processing bowl onto the base of the 

processor before fitting any attachments.

•  All blades and attachments should be removed 

with care before cleaning.

•  Potential injury from misuse.
•  Do not over fill the processor.
•  Do not process for longer than the time periods 

recommended in the operating chart.

•  Always remove the blade before emptying the 

processing bowl of its contents.

•  Do not operate for more than 30 seconds at a time 

when processing heavy loads. None of the recipes 
in this manual are considered a ‘heavy load’.

•  Take care when removing the bowl from the base, 

emptying the bowl or during fitting and removal of 
blade system, as blades are extremely sharp.

  If you have any concerns regarding the performance and use of your appliance,  

please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line. 

  Ensure the above safety precautions are understood.

Sunbeam’s Safety Precautions

  Sunbeam is very safety conscious when designing and 

manufacturing consumer products, but it is essential 

that the product user also exercise care when using 

an electrical appliance. Listed below are precautions 

which are essential for the safe use of an electrical 

appliance:

•  Read carefully and save all the instructions provided 

with an appliance.

•  Always turn the power off at the power outlet before 

you insert or remove a plug. Remove by grasping the 
plug - do not pull on the cord.

•  Turn the power off and remove the plug when the 

appliance is not in use and before cleaning.

•  Do not use your appliance with an extension cord 

unless this cord has been checked and tested by a 
qualified technician or service person.

•  Always use your appliance from a power outlet of the 

voltage (A.C. only) marked on the appliance.

•  This appliance is not intended for use by persons 

(including children) with reduced physical, sensory 
or mental capabilities, or lack of experience and 
knowledge, unless they have been given supervision 
or instruction concerning use of the appliance by a 
person responsible for their safety. 

•  Children should be supervised to ensure that they do 

not play with the appliance.

•  The temperature of accessible surfaces may be high 

when the appliance is operating.

•  Never leave an appliance unattended while in use.

•  Do not use an appliance for any purpose  

other than its intended use.

•  Do not place an appliance on or near a hot gas 

flame, electric element or on a heated oven. 

•  Do not place on top of any other appliance.
•  Do not let the power cord of an appliance hang over 

the edge of a table or bench top or touch any hot 
surface.

•  Do not operate any electrical appliance with a 

damaged cord or after the appliance has been 
damaged in any manner. If damage is suspected, 
return the appliance to the nearest Sunbeam 
Appointed Service Centre for examination, repair  
or adjustment. 

•  For additional protection, Sunbeam recommend the 

use of a residual current device (RCD) with a tripping 
current not exceeding 30mA in the electrical circuit 
supplying power to your appliances.

•  Do not immerse the appliance in water or any other 

liquid unless recommended.

•  Appliances are not intended to be operated  

by means of an external timer or separate remote 
control system.

•  This appliance is intended to be used in household 

and similar applications such as: staff kitchen areas 
in shops, offices and other working environments; 
farm houses; by clients in hotels, motels and other 
residential type environments; bed and breakfast 
type environments.

Summary of Contents for LC9600Z



















Reviews: