12
Reversible grating, shaving and shredding
blades
1. Fit the processing bowl and spindle as
detailed previously, in figures 1, 2 and 4.
2. Select the 'Reversible' disc of your choice
- Shredding (fine or coarse), Grating or
Shaving.
3. Fit the disc over the spindle and press
firmly into place, see figure 6.
Warning:
Use caution as the blades are sharp.
4. Fit the processing cover to the processing
bowl as previously shown in figure 3 and
place the food pusher in the feed tube.
5. Plug the power cord into a 230-240V AC
power outlet and turn the power ‘ON’.
6. Start processing using the On/Off button.
7. When processing is complete, remove the
disc and spindle from the processing bowl
before removing the processed food.
Variable slicing blades
1. Fit the processing bowl and spindle as
detailed previously in figures 1, 2 and 4.
2. Fit the slicing disc over the spindle and
press firmly into place, see figure 7.
Warning:
Use caution as the blades are sharp.
3. Fit the processing cover to the processing
bowl as previously shown in figure 3 and
place the food pusher in the feed tube.
4. Plug the power cord into 230-240V AC
power outlet and turn the power 'ON'.
5. Start processing using the On/Off button.
6. When processing is complete, remove the
disc and spindle from the processing bowl
before removing the processed food.
Fitting/using the tools on your Oskar™ Professional continued
Fig 7
Fig 6
Fitting/using the tools on your Oskar
®
Professional continued
Summary of Contents for Oskar LC7600C
Page 2: ......