background image

Long cord with 360º cord outlet
The cord outlet is ideal for left or right 
hand use, and provides greater versatility 
and ease of movement when ironing. The 
flexible grommet protects the cord from 
fraying.

Safety auto-off (Model SR4300 only) 
The iron automatically switches itself off 
if left in the ironing position (horizontal) 
for 30 seconds, or in the heel rest 
position (vertical) for 15 minutes. (For 
more information on the safety auto off 
feature see page 7).

Thermostat light
Illuminates to indicate that the iron 
is heating and goes out when it has 
reached the selected temperature. The 
thermostat light cycles on and off during 
ironing as the iron maintains the selected 
temperature.

Variable steam
The steam dial allows you to select the 
desired steam output for each garment. 
Alternatively, select the DRY setting to 
iron without steam.

Temperature dial
Allows you to select the desired 
temperature for each garment. The 
adjustable temperature dial also indicates 
the amount of steam recommended for 
use on each temperature setting.

Stable heel rest 
Large heel rest keeps the iron stable on 
the ironing board.

Cord wrap facility 
The built-in cord wrap facility allows you 
to wind the cord around the heel for neat 
and tidy storage of the cord when the iron 
is not in use.

2100 watts for fast heat up 

5

Summary of Contents for Pro Steam SR4100













Reviews: