CT-2005
- 2 -
SPECIFICATIONS
‧ Laser class: Class 2 laser product DIN EN 60825–1: 2007
‧ Wavelength: 650nm±10nm@25ºC
‧ Spectral width: <10nm
‧ Output Power:
>600µW@25ºC into 9µm fiber
‧ Mode: CW/Pulse
‧ Battery: AAA 1.5V X 2
‧ Indicator: Power/Battery low
‧ Output power reliable: +/– 0.2mW
‧ Spectral width: <10nm
‧ Range: Visibility to 5km
‧ Operating temp: 0 to 50ºC
‧ Storage temp: 0 to 70ºC
OPERATION
‧ Powered by two 1.5V AAA batteries.
‧ Lift the front dustproof up and insert the fiber cable to the universal connecter. Switch the slide
switch to CW or Pulse position, the power indicator LED lights green. (Red light represents power
low, please replace the batteries).
‧ A visible 650nm wavelength red laser is visible through the fiber optic cable, the breaks or faults in
the fiber will refract the light and create a bright glow around the faulty area.
‧ This product has been passed through FDA Laser safety certifications, but we still highly
recommend that you avoid any exposure to your eyes.
CAUTIONS
‧ Attention if the device is used for different fields of application as suggested, it may cause severe
harm through laser rays.
‧ Keep the device safely stored and out of the reach of children
‧ Never point the laser beam directed at persons
‧ Do not stare into the laser beam or the reflected laser beam
‧ If laser radiation enters the eye, the eyes are deliberately to be close and you＇re your immediately
away from beam
‧ Any manipulations (changes) to the laser device are prohibited
‧ These instructions are to be kept and to give forward when passing the laser device to another user
