SunBriteTV Model SB-2220HD Operator’s Manual
Page 9
Page 9
TV Installation – Rear Panel Internal Connect Source
WARNING: Do not connect the power source before making connections.
Internal Connect Source
The Internal Connect Source allows you to easily connect to the Audio, Video, S-Video, SVGA, HDMI, Audio Out, and RF connectors.
The Internal Connect Source is inside the Cable Cover located on the back of the unit (Figure 1).
1. Unscrew the two gray Thumb Screws (Figure 1), and pull the cover towards you.
2. Route the cables to the proper inputs, and place the cable cords over the Rubber Sealing Gasket (Figure 2).
3. Close the cover.
4. Press firmly on the cover, and screw the Thumb Screws tightly (Figure 3).
Figure 1
Figure 2
Figure 3
Rubber Sealing Gasket
Thumb Screws
TV Installation - Connecting the Power Cord
Do not connect power cord until all cable connections have been made.
Connect the power cord to a GFCI protected AC outlet with an “in-use” waterproof cover.
WARNINg:
TV AND gFCI RECEPTAClE MUST BE INSTAllED AT lEAST 5 FEET AWAY FROM STANDINg WATER , SUCH AS (BUT NOT
lIMITED TO) A POOl OR SPA.
Summary of Contents for SB-2220HD
Page 36: ...www sunbritetv com ...