Page 34
780 Series
10.4 Programming the Change Filter Timer
A programmable filter timer can be set to remind you when to clean or
replace the filters.
• The default setting is for 180 days.
• The timer range is from OFF to 180 days, in increments of 10
days.
Note:
It is not recommended that this feature be turned OFF. In order to
continually maintain clean and working filters, it should be program as
instructed.
A.
Programming or resetting the timer.
Note:
If no button is pressed within 5 seconds of each
selection the screen will revert back to the Main Menu and the
current settings will remain active.
1. Press
until you get to the
“
FC”
Menu. The display will scroll
“
FILTER CHANGE.”
After the second scroll, if no action is taken, the
system will revert back to the Main Menu.
2. Press
or
to prepare the system for changes. Continually
press to adjust the length of time for the timer.
3. Once you select the number of days, press
1
to confirm this
selection. The system will return to the
“
FILTER CHANGE”
Menu.
4. Once the timer expires the display will alternate between the water
temperature and
“
CHANGE FILTER”,
page 51.
10.5 Programming the CLEARRAY® Timer
A programmable change bulb timer can be set to remind you when to
when it is time to replace the UV bulb for the CLEAR
RAY
system.
• The default setting is for 365 days.
• The timer range is from OFF to 365 days, in increments of 10 days.
Note:
It is not recommended that this feature be turned OFF. In order
to continually have the CLEAR
RAY
system effectively preform its
function, it should be program as instructed.
A.
Programming or resetting the timer.
Note:
If no button is pressed within 5 seconds of each
selection the screen will revert back to the Main Menu and the
current settings will remain active.
1. Press
until you get to the
“
UV”
Menu. The display will scroll
“
CLEARRAY BULB.”
After the second scroll, if no action is taken,
the system will revert back to the Main Menu.
2. Press
or
to prepare the system for changes. Continually
press to adjust the length of time for the timer.
3. Once you select the number of days, press
1
to confirm this
selection. The system will return to the
“
CLEARRAY BULB”
Menu.
4. Once the timer expires the display will alternate between the water
temperature and
“
CHANGE CLEARRAY BULB”
page 51.
Summary of Contents for 780 series
Page 1: ...Owner s manual P N 6530 607E Rev A 780 Series Hamilton Chelsee Bristol Hanover Montclair Dover...
Page 6: ......
Page 75: ......
Page 76: ......
