2
performed by persons with inadequate technical knowledge may adversely affect the performance of the
appliance, causing damage to the equipment, and void the warranty.
•
It is dangerous to make alterations or attempt to modify this product in any way. Product alterations will
void the warranty.
During Use
•
This appliance is designed for
domestic use only
! Specifically for the storage of
NON-PERISHABLE
edible/consumable food and drinks (foodstuff). It is not intended for commercial or industrial use.
•
Do not store any containers with flammable vapors or liquids in or around the appliance, such as organic
solvents, spray cans, gas cans, etc.
Danger of explosion!
Cleaning
•
Before cleaning always disconnect from the electrical power supply.
Servicing
•
This product should be serviced by an authorized technician and only genuine spare parts should be used.
•
Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by
inexperienced persons may cause injury or serious malfunctioning of the appliance. Unauthorized work
may void the warranty.
At the end of the appliance life
When disposing of your appliance, use an authorized disposal site. The refrigerant must be completely drained and
collected by an authorized technician for recycling prior to disposal. Check with your local Environmental Agency
for recommendations on recycling this appliance in your area. Remove the electrical connection wiring and also
ensure that the lid is removed to prevent young children from being trapped inside.
DANGER OF
SUFFOCATION!
INSTALLATION
Unpacking and Cleaning
Remove all packaging and securing tapes from the appliance. To avoid injury and causing damage to the appliance,
be extremely cautious when using sharp or pointed tools to complete this task.
Keep children away from the
packaging material. DANGER OF SUFFOCATION!
Wash the inside and outside of the appliance with luke
warm water and a mild soap or detergent. Abrasive or corrosive cleaning agents, steel wool, scouring sponges, or
chemical cleaning agents should not be used under any circumstances. A sponge, soft brush or towel is
recommended. After cleaning, thoroughly rinse and dry. You may want to leave the lid open allowing the
compartment to ventilate for 20-30 minutes to get rid of residual odors. Check with your local Environmental
Agency for recommendations on recycling packaging materials in your area.
Positioning of BFR105 Refrigerator
The area in which the appliance is to be installed must be relatively cool, dry, and suitably ventilated. The area must
be protected against any beating rain and free of abundant dust. To ensure proper function, the appliance must be
placed horizontally on a flat, firm, and stable surface resting level on all four supports. The floor must be sufficiently
strong enough to support a fully loaded cabinet. Use wood or metal shims to level the appliance if necessary. Do not
place the appliance close to heat sources (heater, stove, boiler, chimney, etc). Exposure to sunlight will cause
adverse effects to performance. This appliance uses the exterior walls to transfer heat from the inside of the cabinet.
Ensure that there is adequate space between the appliance and neighboring walls or large objects.
A minimum
spacing of 3 inches (7.5cm) is highly recommended.
This will provide sufficient airflow around the appliance
resulting in more efficient operation and longer appliance lifetime. Always keep the air vent openings of the
compressor housing cover free from dust and obstructions
ELECTRICAL DC CONNECTION
The appliance should be left for 2 hours after positioning before it is turned on, in order to allow the refrigerant oil to
settle. If the appliance has been handled standing on its side or on end, it should be allowed to stand in the normal
