3. Putting the hood on
2020-04-23
OI06H-0218 SR 520
6
3.1
Adjust the head harness
by adjusting the length of the
Velcro strap. This is important
for ensuring a good fit.
Connect the hose, put the fan
unit on and start it. See the
user instructions for the SR
500/SR 500 EX or SR 700.
3.2
Grip the hose mounting
with one hand and, with the
other, hold the strap in the
lower part of the hood.
3.3
Put your chin into the
hood.
Keep hold of the strap and
pull the hood over your head
with the hand holding the
hose mounting.
Adjust the hood so that it
seals all the way round your
face and so that it fits firmly
and comfortably.
Make sure that the breathing
hose runs along your back
and is not twisted.