CAN & Power Connection
-2/2-
PAS TYPE:
Select parking line type.
NOT USED: Do not use parking line
PAS ON: Use Flexible Parking Lines
PAS OFF: Use fixed parking line
PAS SETUP
:
You can move the position of parking line.
- H-POSITION: Moves the OSD screen left and right.
- V-POSITION: Moves the OSD screen up and down.
REAR TYPE :
Choose rear camera recognition.
CAN : By connecting to “CAN” cable of the car gear,
changing to rear camera mode when shifting into
reverse. (Connect “CAN” cable of the power cable
to the “CAN” cable of the car gear)
LAMP : By connecting to the rear lamp of the car,
switch to rear camera mode when shifting into rear.
(Connect “Rear-C” cable of the power cable to the
rear lamp of the car)
SAFE ENABLE :
If it is enable, HDMI, RGB, and A/V
mode doesn’t show up while driving. (Default : NO)
USM BEN9
NAVI MODEL
:
Navigation model setting
BACK LIGHT
:
LCD brightness setting
when the rear lamp is
"ON“
FCAM FUNC :
FCAM usage and time
setting
INFO
: System version
information
OSD & FACTORY MENU
BRIGHTNESS
: Adjust screen brightness
CONTRAST
: Adjust screen contrast
SHARPNESS
: Adjust screen sharpness
USM-BENZ9-NTG 4.5 MANUAL
Update : 2018. 09. 19
USM BENZ9
FACTORY RESET :
- YES: Reset OSD settings
8
7
IMAGE
PARK
FUNCTION
UTIL
SYSTEM VERSION
MAIN
：
U1.8.08.01
※
You can find the following cables in the rear side of OEM monitor.
INFO
* Connect provided CAN-H (white) cable
with OEM CAN-HIGH (brown + red) cable.
* Connect provided CAN-L(yellow) cable
with OEM CAN-LOW(brown) cable.
CAN
-
H
CAN - L
* Connect provided Jack by Jack cable to the rear of the OEM monitor.
* Connect the OEM LVDS cable to provided LVDS IN port.
※
Press
◀ (
in remote control) 2 seconds, could
access the factory mode
