8057NITRO
Rev. 12/12/16
Tools Needed for Assembly:
13mm Socket or Wrench
Assembly Instructions:
Mount push handle/brackets
assembly (Part #6) to the same
side of the cart as the swivel
locking casters using the four
stove bolts, washers, and
nuts provided.
Using 13mm socket or wrench
completely tighten all nuts.
Overall Load Capacity .........................600 Lbs. Top Compartment Capacity ..............180 Lbs. Drawer Capacity .................. 70 Lbs. Each
• It is the responsibility of the owner to make sure all personnel read this manual prior to using the device. It is also the responsibility of the
device owner to keep this manual intact and in a convenient location for all to see and read. If the manual or product labels are lost or not legible,
contact Sunex Tools
®
for replacements. If the operator is not fluent in English, the product and safety instructions shall be read and discussed with
the operator in the operator's native language by the purchaser/owner or his designee, making sure that the operator comprehends its contents.
• Read and follow all instructions in User’s Manual. • Do not load carts beyond rated capacity (600 Lbs.). • Lock lid and drawers before moving.
• Apply brake on locking casters anytime cart is in place. • Do not pull cart. Push from handle on end to move. • Units can tip or fall causing
damage or personal injury. • Do not stand on or step in drawers. • Do not open more than one loaded drawer at a time. • Cart is designed to roll
easily on flat surfaces and should not be used on uneven or inclined surfaces. • Keep children away from unit. • Wear gloves when lifting by edges.
• This product may contain one or more chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Wash hands thoroughly after handling.
• Failure to heed these warnings may result in personal injury and/or property damage.
#6
SWIVEL
CASTERS
SWIVEL
LOCKING CASTERS
ASSEMBLY INSTRUCTIONS
MODEL 8057NITRO
PREMIUM FULL DRAWER
SERVICE CART - NITRO FISH
WARNING
© Copyright 2016, Sunex Tools
®
