background image

8

Rev. 04/10/03

PARTS LIST - 90045

ITEM NO.

DESCRIPTION

RS1700RK

Repair Kit*

RS1701 - 1.7

Air Nozzle 1.7mm (Standard)

RS1704 - 1.7

Fluid Nozzle 1.7mm (Standard)

RS1705

Packing Screw

RS1706

Teflon Seal

RS1707

Washer

RS1708

Spring

RS1709

Brass Baffle (Left-Hand Thread)

RS1710

Gasket

RS1711

Connector

RS1713

Air Valve Assembly

RS1714

Fan Adjustment

RS1715

Control Knob

RS1716 - 1.7

Paint Needle 1.7mm (Standard)

RS1717

Spring

RS1718

Lock for Fluid Control Knob

RS1719

Fluid Control Knob

RS1720

Screw

RS1722

Trigger

RS1724A

Screw & Nut

RS1725A

Pin & Clip

RS1726

Air Connection

RS1730A

Spanner

RS1731

Socket Spanner

RS1732

Brush

RS1733

Air Adjusting Valve Assembly

RS9003PKG

Material Filter (10 Pack)

RS9612N-0

Hanger

RS600CC

Replacement Aluminum Cup and Lid

RS1729AL-1

Gasket for Aluminum Lid

*Includes all parts as asterisked on parts diagram.

Limited Warranty...

SUNEX INTERNATIONAL, INC. WARRANTS TO ITS CUSTOMERS THAT THE COMPANY’S SUNEX TOOLS

®

BRANDED

PRODUCTS ARE FREE FROM DEFECTS IN WORKMANSHIP AND MATERIALS. 

Sunex International, Inc. will repair or replace its Sunex Tools

®

branded products which fail to give satisfactory service due to defective 

workmanship or materials, based upon the terms and conditions of the following described warranty plans attributed to that specific product.
This product carries a 90 day warranty. During this warranty period, Sunex Tools will repair or replace at our option any part or unit which
proves to be defective in material or workmanship.

Other important warranty information...

This warranty does not cover damage to equipment or tools arising from alteration, abuse, misuse, damage and does not cover any repairs or
replacement made by anyone other than Sunex Tools or its authorized warranty service centers.The foregoing obligation is Sunex Tools’ sole
liability under this or any implied warranty and under no circumstances shall we be liable for any incidental or consequential damages.

Note:

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may

not apply to you. Please contact your local Sunex distributor for proper warranty handling procedures.
If you have any questions about warranty service, please write to Sunex Tools. This warranty gives you specific legal rights and you may also
have other rights which vary from state to state. Repair kits and replacement parts are available for many of Sunex Tools products regardless
of whether or not the product is still covered by a warranty plan.

Shipping Address:

Sunex Tools  •  315 Hawkins Rd.  •  Travelers Rest, SC 29690

Mailing Address:

Sunex Tools  •  P.O. Box 4215  •  Greenville, SC 29608

90045_op man_041003  4/18/03  1:59 PM  Page 8

Summary of Contents for 90045









Reviews:

Related manuals for 90045