background image

ITEM NO.

PART NO.

DESCRIPTION

1

RS801-01

Air Cap/Retaining Ring

2

RS801-02

Fluid Tip and Gasket

3

RS801-03

Gasket

4

RS801-04

Baffle

5

RS801-05

Lock Nut

6

RS801-06

Nipple

7

RS801-07

Packing (2)

8

RS801-08

Packing Gland

9

RS801-09

Trigger Bearing Stud

10

RS801-10

Trigger

11

RS801-11

Screw

12

RS801-12

Nipple

13

RS801-13

Gasket

14

RS801-14

Bushing

15

RS801-15

Fluid Needle

16

RS801-16

Spring

17

RS801-17

Adjusting Screw

18

RS801-18

Fan Adjustment Assembly

21

RS801-21

Air Valve Assembly

*

RS801SK

Repair Kit

*Includes all parts as asterisked on parts diagram.

SX80A

8

Rev. 05/09/03

PARTS LIST - SX80A

LIMITED WARRANTY...

SUNEX INTERNATIONAL, INC. WARRANTS TO ITS CUSTOMERS THAT THE COMPANY’S SUNEX TOOLS

®

BRANDED

PRODUCTS ARE FREE FROM DEFECTS IN WORKMANSHIP AND MATERIALS. 

Sunex International, Inc. will repair or replace its Sunex Tools

®

branded products which fail to give satisfactory service due to defective 

workmanship or materials, based upon the terms and conditions of the following described warranty plans attributed to that specific product.
This product carries a 90 day warranty. During this warranty period, Sunex Tools will repair or replace at our option any part or unit which
proves to be defective in material or workmanship.

Other important warranty information...

This warranty does not cover damage to equipment or tools arising from alteration, abuse, misuse, damage and does not cover any repairs or
replacement made by anyone other than Sunex Tools or its authorized warranty service centers.The foregoing obligation is Sunex Tools’ sole
liability under this or any implied warranty and under no circumstances shall we be liable for any incidental or consequential damages.

Note:

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may

not apply to you. Please contact your local Sunex distributor for proper warranty handling procedures.
If you have any questions about warranty service, please write to Sunex Tools. This warranty gives you specific legal rights and you may also
have other rights which vary from state to state. Repair kits and replacement parts are available for many of Sunex Tools products regardless
of whether or not the product is still covered by a warranty plan.

Shipping Address:

Sunex Tools  •  315 Hawkins Rd.  •  Travelers Rest, SC 29690

Mailing Address:

Sunex Tools  •  P.O. Box 4215  •  Greenville, SC 29608

Summary of Contents for SX80A









Reviews: