SunEyes V Series
IP Camera Quick Installation User Manual
Page
26
on Page 41
When using RTSP Connection, if choose open, you need to input login user name and
password; if choose close, you don’t need to input camera’s user name and password, then
can enter into camera.
4.3.2
wireless setting
The interface of enable WIFI setting as below, users can click “search”, then it popup a
page, displaying all Wifi network can be found, select a network, all parameters will fill into
the parameter column(for example: SSID, encryption algorithm, etc.) automatically, users
only need to fill in password and confirm password. After the configuration, you can click
“check”, to test whether the configuration is correct.
Note: Before configurate WIFI network, please check whether this device with built-in
wifi module, otherwise it can’t use wireless network.
Note: When the device connected network cable, and also enabled WIFI, strating the device,
it will choose wired connection firstly, if unable to connect, then choose WIFI connection.
Wifi connection use the same IP Address and port as network cable connection.
