EN - 3 -
BEFORE USING THE APPLIANCE
PART -1
General warnings
WARNING:
Keep vantilation openings, in the appliance
enclosure or in the built-in structure, clear of obstruction.
WARNING:
Do not use mechanical devices or other means
to accelerate the defrosting process, other than those
recommended by the manufacturer.
WARNING:
Do not use electrical appliances inside the food
storage compartments of the appliance, unless they are of the
type recommended by the manufacturer.
WARNING:
Do not damage the refrigerant circuit.
WARNING:
To avoid a hazard due to the instability of the
appliance, it must be fixed in accordance with the instructions.
WARNING:
When positioning the appliance, ensure the supply
cord is not trapped or damaged.
WARNING:
Do not locate multiple portable socket-outlets or
portable power supplies at the rear of the appliance.
SYMBOL ISO 7010 W021
Warning:
Risk of fire / flammable materials
•
If your appliance uses R600a as a refrigerant – you can learn
this information from the label on the cooler- you should
be careful during shipment and installation to prevent your
appliance’s cooler elements from being damaged. Although
R600a is an environmentally friendly and natural gas. As it is
explosive, in the event of a leak due to damage to the cooler
elements, move your fridge from open flame or heat sources
and ventilate the room where the appliance is located for a
few minutes.
•
While carrying and positioning the fridge, do not damage the
cooler gas circuit.
•
Do not store explosive substances such as aerosol cans with