14
User’s Manual
CHAPTER 2 – Connections and Remote
Power On and Off
The TGM-100 is designed to remain switched on continu
-
ously. However, if you are not planning to use it for an
extended period, you may want to switch it off.
To switch off, press the
•
;
button on the front panel.
After a brief period, the unit will switch off and the
Power LED will go out.
To switch back on, press the
•
;
button on the front
panel again. After a brief period, the unit will switch on,
the Power LED will glow blue and the User Interface
will display the
menu
screen.
If the TGM-100 Server is switched off, any connected
clients will be disconnected, but can still play DVDs and
audio CDs using their slot loading drives.
Power Off with the Remote Control
This function is performed in the
TV UI
.
Either:
Press the
•
;
Standby
button on your remote control.
Or:
Press the
•
à
Library
button to display the
Home
Screen
.
Use the
•
U
and
V
buttons to select the
Set Up
option.
Use the
•
O
Select
button to display the
Set Up
menu.
Use the
•
U
and
V
buttons again to select
Shutdown/
Restart
.
Press the
•
O
Select
button.
The TV will display the following screen:
To Shut down:
Highlight
•
Yes
and press the
O
Select
button on the
remote control to switch the unit off.
Note
To switch the unit on again, use the
;
button on the
front panel or remote.
To Restart
From the
•
Power
list item, highlight
Restart
and press
the
O
Select
button on the remote control to switch the
unit off and then on again.
Emergency Shutdown
Holding down the
;
button on the front panel for 5 sec-
onds will force the unit to shut down immediately. This must
only be performed if the unit becomes unresponsive and
cannot be shut down correctly. Data corruption may occur
as a result of improper shutdown.
Note:
If you have any clients connected, should any one of
the units in the networked system be forcibly shut down, all
the units in the system should be restarted.
