Thank you for purchasing a Sunforce Portable Solar Power Kit. Please read these instructions carefully and thoroughly before
using the product. Your new Portable Solar Power Kit is a state-of-the art device which was developed according to the latest
technology standards. This manual gives important recommendations for installing and usage as well as remedies in case of
problems. Read carefully and mind the safety and usage recommendations at the end of the manual.
Serial Description of parts
Quantity
1
Folding Solar Charger
•
13 Watt Amorphous solar cell technology
•
Adjustable Support Panel to Maximize Power Output
•
Capable to charge 12V and 24V battery
1
2
Battery Power Pack
•
12V/7Ah maintenance free sealed lead acid battery
•
Input & output
•
Integrated Charge Controller
1
3
12Volt DC Plug
1
4
Quick connect Alligator clamps
1
CAUTION
•
Please read the instructions carefully and thoroughly before using the product.
•
Always disconnect power adapter cables before moving the system.
•
Never assume that power is disconnected.
•
Clean the surface of solar panel periodically with a soft cloth for insured performance. Do not use any abrasive
solvents or materials.
•
For optimal charge leave uninterrupted for three sunny days.
•
A 150 Watt inverter is recommended for this application.
•
Connect the external inverter (not included) to the Inverter output of the battery Power Pack.
•
Batteries can produce flammable gases. Avoid making sparks, using fire or any flame. Make sure that the area where
the Power Pack will be used is ventilated.
•
Batteries store a large amount of energy. Never short circuit a battery under any circumstances.
•
Make sure that the voltage switch on the Folding Solar Charger is turned to “12V” before
connecting to the power unit.
