2/9/2018
SunFounder 250+Radiolink T8FB Remote Controller(Assembled) - Wiki
http://wiki.sunfounder.cc/index.php?title=SunFounder_250%2BRadiolink_T8FB_Remote_Controller(Assembled)
3/22
ESC.
4. Weight: 519g ; Duration of flight: 7 minutes
；
Working voltage: 11.1V
5. CC3D software debugging guide and Radiolink T8FB Remote Controller are provided for you.
Prior to flying the plane, you need to know more about the plane and flight. Please read the following instructions carefully
and make sure you understand well before actual flight.
Components Test Before Assembly
Please check whether the components on the list are damaged or missing. Remember to test the components like battery,
power indicator alarm, etc., before assembly. If everything works fine, then we can start the test for assembled kit.
1. Battery, Balance Charger and Power Adapter Test
Test Operations:
1. Connect the PR301 Li-ion Polymer Balance Charger (Power Charger) and 12V 1.5A Power Adapter, and plug the adapter
to a socket. The power indicator on the balance charger will flash green, while the charging indicator orange (as shown in
Figure 1-1). The charging indicator will dim one second later (as shown in Figure 1-2), meaning the connection works fine.
Figure 1-1 & Figure 1-2
