36
Move the aux channel for flight mode setting, and you can see the Slider is toggled to the
corresponding position (
Pos. 1
,
Pos. 2
,
Pos. 3
…).
For beginners, DO select
Pos. 1
.
You can try
Pos. 2 or higher level when you've mastered the basic control and can handle higher ones.
Note: The figure below is to show you that you can move the aux channel to select the flight
mode, which does NOT mean to select Pos. 2. For beginners, please select
Pos. 1
.
Click
Save.
Calibrating the Aircraft
Actually we have configured the aircraft previously and you can skip this step. But if the
aircraft keeps tilting to one side during the flight, you can take these instructions.
SunFounder