3
For SF250 Assembled Kit (with Radio Transmitter)
For the SF250 assembled kit, most of the components have been assembled except the
propellers and the battery before arriving at your doorstep. Please finish the assembly by
following the tutorial in
WIKI
->
Drones/Model Aircrafts
->
CC3D
->
SunFounder 250+Radiolink T8FB Remote Controller(Assembled).
The receiver included is a PWM mode one with firmware burnt. If the firmware is missing due
to an aircraft collision or some other reasons, you need to reburn it; please refer to
3. CC3D
Software Debugging
.
SunFounder