P a g e
|
5
TYPICAL WOOD PLATE TO EXISTING CONCRETE PAD
ATTACHEMENT
CONCRETE PAD
USING THE SUPPLIED DIMENSIONS FASTEN A
2” X 4” PRESSURE TREATED FRAME
TOGETHER. COUNTER SINK TWO HOLES ON
EACH OF THE FOUR SIDES OF THE FRAME.
USING A MASONARY DRILL BIT, DRILL INTO THE
CONCRETE PAD & FASTEN THE FRAME TO THE
CONCRETE USING WEDGE ANCHORS. MAKE
SURE THE ANCHOR IS SET FLUSH TO THE TOP
OF THE WOOD BASE.
2” X 4” WOOD PLATE
EXISTING CONCRETE PAD
COUNTER SINK FASTENERS
