11
IItte
em
m
D
De
essiig
gn
na
attiio
on
n
D
De
essc
crriip
pttiio
on
n
I
WLAN antenna
4G antenna
The Logger1000A is provided with the 4G
antenna mounting hole while Logger1000B is
not. Specifically, refer to the actual product
received.
J
Power box
Converters the AC current into DC current
Length of supporting guide rail: 170mm
5.2
Identifying the Logger1000
The type and key technical parameters of the Logger1000 can be found on the
nameplate. The nameplate is attached to the back of the Logger1000, shown by A in
the figure below.
The nameplate contains important parameters. Ensure it is intact and clearly
legible.
5.3
Checking upon Receiving
The Logger1000 is thoroughly inspected and packed before delivery, but damage may
be still caused during transport. Check the following items carefully once receiving the
Logger1000.
•
Check the scope of delivery for completeness according to
•
Ensure that the device type is correct.
•
Check the device thoroughly and ensure there are no visible damages.
If there are any problems, contact SUNGROW or the forwarding company.
Only undamaged Logger1000 can be installed and commissioned. Before
installation, ensure that:
•
The Logger1000 is intact without any damages.
•
Related documents, such as quick user manual, are enclosed.
User Manual