18
6.5
Installing Power Box
Mount the power box onto the concrete wall or metal surface according to
onsite conditions.
Secure the power box via the buckles (as shown in the figure below) on the back of it.
Step 1
Install and secure the power box guide rail at the appropriate location.
The power box should be 200mm away from the Logger1000 to ensure that
the power cable from the power box can be connected to the power input port
of the Logger1000.
Step 2
Tilt the power box and hook the buckle into the guide rail. Press down the power box
until it snaps into place with an audible "Click" sound.
User Manual
