33
N
No
o..
S
Stte
ep
p
R
Re
essu
ulltt
7
Set the devices connected to the Logger1000 through the
device management function. If the device connected for
the first time is SUNGROW string inverter, use
function to search the device whose address will be
automatically allocated. For devices of other types, connect
them to the Logger1000 by referring to
For the devices of other types, the communication address
needs to be preset.
□
8
Enable the DHCP service of the router, so that the
Logger1000 automatically obtains the IP address via the
DHCP function.
□
9
Set the iSolarCloud address if data needs to be uploaded to
cloud server.
The default iSolarCloud station is "China Station". Users in
mainland China access the "China Station", users in Europe
access the "Europe Station", and users in other regions
access the "International station".
□
10
Check the data of SUNGROW string inverter for correctness
on the real-time information interface.
□
11
Create new plant via the iSolarCloud App and check the
iSolarCloud data for correctness.
□
The auto search function is available for SUNGROW string inverters whose
addresses are automatically allocated.
Devices of other types, such as Smart Energy Meter and transformer, can be
connected to Logger1000 via the adding device function.
Addresses of the device connected to the same communication port should
be different from each other.
Save the settings after operation, and otherwise the settings will not take
effect.
User Manual
