36
User types include "general user" and "O&M user".
The general user can view basic information, real-time fault, and device
monitoring information of the Logger1000.
In addition to all permissions of the general user, the O&M user has the
permission to set and modify parameters of the Logger1000 and devices
connected to the Logger1000.
In the following, description is given by using the O&M permission as an
example.
After login for the first time, it is recommended to change the password as
soon as possible. Click "O&M user" -> "Modify password" to change the
password.
With the login password forgotten, contact SUNGROW and provide the device
S/N as well as system time, to get the password.
9.2.2 Ethernet Login
Step 1
The IP address of the PC connected to the Logger1000 is the same as that of the
Logger1000. The IP address is 12.12.12.X. For example, the IP address of the PC can
be set to 12.12.12.125, and the subnet mask is 255.255.255.0.
IP of Logger1000 is 12.12.12.12 by default, and subnet mask is
255.255.255.0.
Step 2
Connect the Logger1000 to the PC via the Ethernet.
Step 3
Enter the IP address 12.12.12.12 of the Logger1000 in the PC address bar to enter the
general user login interface.
Step 4
Click the button "Login" in the upper right corner, enter the default password "pw1111",
and click "Login", to enter the O&M user interface.
-- -- E
En
nd
d
User types include "general user" and "O&M user".
Users of different types have different permissions.
9.3
Web Main Interface
When the "O&M user" logs into the Web for the first time, the "Help" window pops up.
Follow the prompts to perform operations such as time synchronization, device
connection, and forwarding configuration.
The Web main interface is as follows:
User Manual