51
Table 9-4
Parameter description
P
Pa
arra
am
me
ette
err
D
De
essc
crriip
pttiio
on
n
R
Ra
an
ng
ge
e
Port
-
Serial port: COM1、COM2、COM3
Network port: ETH, WiFi, 4G
Duration
Export the message
recorded during the set
time
1min ~ 10min
Step 2
Set parameters, including interface, serial port, and duration, and click "Start" to start
recording message. The recording automatically stops when the set time reaches, or
the user may manually click the button "Stop" to stop recoding message.
Step 3
Click "Export" to export the message.
-- -- E
En
nd
d
9.10.5 System Time
Click the "System Time" to check whether the current system time is correct,
synchronize the system time, and enable/disable "Inverter Timing".
Click "System" -> "System Time" to enter the corresponding interface.
Method of setting system time:
•
When the option "Inverter Timing" is selected, SUNGROW inverter time will be
synchronized with the time of Logger1000.
•
When the clock source is set to "User Define", user can manually set the current
system time and time zone in the following two manners:
– Select "Use PC Time" to synchronize the time of the Logger1000 with the time of
the PC.
– Click the "Time Zone" pull-down-list and select the local time zone. Enter the "-
Date" and "Time" and click "Save" to manually set the time of the Logger1000.
User Manual
