12
5.4
Storage
If the Logger1000 is not to be installed immediately after receiving, observe the
following requirements to store it properly:
•
The Logger1000 should be store in its original packing case and placed in a
wellventilated, dry, and tidy room.
•
The storage carrier should be suitable for the weight of the Logger1000.
•
The storage environment should be well ventilated, dry, and without any
accumulated water.
•
Ambient temperature: -40℃ to +85℃; relative humidity: 0~95%, no condensation.
•
Take precautions to protect the device against damage due to harsh environment
such as shock cooling, shock heating, and collision.
•
Regularly inspect the Logger1000, usually at least once a week. Check the packing
case for intactness and replace it immediately when necessary.
•
Unpack and check the Logger1000 in powered on state if it has been stored more
than half a year.
•
The Logger1000 must be packed during storage!
•
Never store the Logger1000 outdoors or in an environment directly exposed
to sunlight!
•
No tilting or stacking!
After long-time storage, thoroughly check the Logger1000 and ensure it is
undamaged before installation. If necessary, install the Logger1000 only after
it has been tested by qualified personnel.
User Manual
