1
1
About this Manual
This manual is valid for the following data loggers researched and manufactured by
Sungrow Power Supply Co., Ltd.
•
Logger1000A (4G version)
•
Logger1000B (non-4G version)
The foregoing Loggers are referred to as the "Logger1000" for short unless otherwise
specified.
1.1
Intended Use
This manual is intended to provide users with detailed information on the Logger1000
as well as installation, operation, and maintenance description.
1.2
Target Group
This manual is applicable to technical personnel who are responsible for the installation,
operation and maintenance of the Logger1000 and to users who need to perform daily
operation. Readers should have some electrical knowledge and be familiar with
electrical principles and electrical components. This manual does not cover the
electrical connections of the inverter and the Meteo Station or related safety instructions.
For the details of the electrical connections of these devices, refer to the corresponding
manuals.
1.3
How to Use This Manual
Read this manual carefully before performing operation on the device. This manual
must be stored at hand and available at all times.
All rights reserved including the pictures, symbols, and markings used in this manual.
Any reproduction or disclosure, even partially, of the contents of this manual is strictly
prohibited without prior written authorization of SUNGROW. The content of the manual
will be periodically updated or revised as per the product development. It is probably
that there are changes in manuals for the subsequent module edition. If there any
mismatch between the product and its manual, the actual product shall prevail and the
manual of the latest version can be obtained from SUNGROW.