70
Select the desired DI channel, fill in the "Percentage"(fixed value of active power), and
click "Save".
-- -- E
En
nd
d
S
Su
ub
bsse
eq
qu
ue
en
ntt O
Op
pe
erra
attiio
on
n
Delete digital input manner: select a digital input manner that needs to be deleted, and
click "Clear data".
10.3.1.6 DRM mode
When using the digital signal at the DI port (DI1 ~ DI4) of the Logger1000 as the
dispatching input, set the active control mode to "DRM mode".
Step 1
Click "Power control" -> "Active power" to enter the active power interface.
Step 2
Set the active control mode to "DRM mode" and click “Save”.
-- -- E
En
nd
d
10.3.1.7 Country mode
If the dispatching input must be the national power dispatching instruction, the active
control mode is set to "Country mode".
Step 1
Click "Power control" -> "Active power" to enter the active power interface.
Step 2
Set the active control mode to "Country mode".
Step 3
Select a country and PPC type, and click "Save".
-- -- E
En
nd
d
10.3.1.8 Scheduling Prohibited
Set the active control mode to "Scheduling prohibited" if the Logger1000 is prohibited to
perform active dispatching on the inverter.
Step 1
Click "Power control" -> "Active power" to enter the active power interface.
Step 2
Set the active control mode to "Scheduling prohibited" and click “Save”.
-- -- E
En
nd
d
10.3.2 Reactive Power
10.3.2.1 Disable
If the grid company does not need the power plant to adjust the voltage at the grid-
connection point, and the inverter does not need to cooperate with the grid for reactive
power compensation, the inverter keeps operating in the reactive-forbidden output
state, and the Reactive control mode is set to "Disable".
Step 1
Click "Power control" -> "Reactive power" to enter the reactive power interface.
Step 2
Set the reactive control mode to "Disable" and click “Save”.
User Manual
