76
10.3.2.6 Country Mode
If the dispatching input must be the national power dispatching instruction, the active
control mode is set to "Country mode".
Step 1
Click "Power control" -> "Reactive power" to enter the reactive power interface.
Step 2
Set the reactive control mode to "Country mode".
Step 3
Select a country, PPC type, and instruction type, and click "Save".
-- -- E
En
nd
d
10.3.2.7 Scheduling prohibited
Set the reactive control mode to "Scheduling prohibited" if the Logger1000 is prohibited
to perform reactive dispatching on the inverter.
Step 1
Click "Power control" -> "Reactive power" to enter the reactive power interface.
Step 2
Set the reactive control mode to "Scheduling prohibited" and click “Save”.
-- -- E
En
nd
d
10.3.3 Emergency Button
In inverters need to be stopped in batch, select the button "Emergency button".
Click "Power control" -> "Emergency button" to enter the corresponding interface.
P
Pa
arra
am
me
ette
err
D
De
essc
crriip
pttiio
on
n
Emergency button
Enable: The emergency button is turned on, and inverters are
stopped in batch.
Note:When the emergency button is recovered, and inverters
are still in standby mode.It is required to boot the inverters
manually via logger or other approaches.
DI port
Associated with DI5 channel
User Manual
