15
5.4
Storage
If the Logger3000 is not to be installed immediately after receiving, observe the
following requirements to store it properly:
•
The Logger3000 should be store in its original packing case and placed in a well-
ventilated, dry, and tidy room.
•
The storage carrier should be suitable for the weight of the Logger3000.
•
The storage environment should be well ventilated, dry, and without any
accumulated water.
•
Ambient temperature: -40℃ to +85℃; relative humidity: 0~95%, no condensation.
•
Take precautions to protect the device against damage due to harsh environment
such as shock cooling, shock heating, and collision.
•
Regularly inspect the Logger3000, usually at least once a week. Check the packing
case for intactness and replace it immediately when necessary.
•
Unpack and check the Logger3000 in powered on state if it has been stored more
than half a year.
•
The Logger3000 must be packed during storage!
•
Never store the Logger3000 outdoors or in a place directly exposed to!
•
No tilting or stacking!
After long-time storage, thoroughly check the Logger3000 and ensure it is
undamaged before installation. If necessary, install the Logger3000 only after
it has been tested by qualified personnel.
User Manual
Summary of Contents for Logger3000
Page 2: ......
Page 6: ......
Page 14: ...8 f fiig gu ur re e 3 3 2 2 Star networking 3 Product Introduction User Manual...
