16
Only undamaged Logger4000 can be installed and commissioned. Before
installation, ensure that:
•
The Logger4000 is intact without any damages.
•
Related documents, such as quick user manual, are enclosed.
5.4
Storage
If the Logger4000 is not to be installed immediately after receiving, observe the
following requirements to store it properly:
•
The Logger4000 should be store in its original packing case and placed in a well-
ventilated, dry, and tidy room.
•
The storage carrier should be suitable for the weight of the Logger4000.
•
The storage environment should be well ventilated, dry, and without any
accumulated water.
•
Ambient temperature: -40℃ to +70℃; relative humidity: 0~95%, no condensation.
•
Take precautions to protect the device against damage due to harsh environment
such as shock cooling, shock heating, and collision.
•
Regularly inspect the Logger4000, usually at least once a week. Check the packing
case for intactness and replace it immediately when necessary.
•
Unpack and check the Logger4000 in powered on state if it has been stored more
than half a year.
•
The Logger4000 must be packed during storage!
•
Never store the Logger4000 outdoors or in a place directly exposed to!
•
No tilting or stacking!
After long-time storage, thoroughly check the Logger4000 and ensure it is
undamaged before installation. If necessary, install the Logger4000 only after
it has been tested by qualified personnel.
User Manual
