46
After logging into the Web, first configure the serial ports of the Logger4000, to ensure
that the Logger4000 can normally communicate with upstream devices. Refer to the
chapter
step 2
Calibrate the system time.
Check whether the current system time is correct, and perform manual time
synchronization or automatic time synchronization when necessary. Refer to the
chapter
step 3
Automatically search the device.
Devices that can be automatically searched, such as SUNGROW string inverter, can be
added via the auto search function with addresses allocated automatically. Refer to the
chapter
step 4
Add the device. Refer to the chapter
step 5
Configure forwarding service.
After all devices have been added, configure the forwarding service of the Logger4000,
to ensure that the Logger4000 can forward the data to upstream devices. Refer to the
chapter
9.9.9 Forwarding Configuration
,
,
9.9.13 Forward GOOSE Service Configuration
-- -- E
En
nd
d
9.5
Overview
9.5.1 General Information
Click "Overview" -> "General information" to enter the corresponding interface.
S
Sh
ho
orrttc
cu
utt M
Me
en
nu
u
•
Device setup
Support of auto search and add device functions. Click the menu to add, delete,
modify, and view the device or perform auto search operation to search the device
to which address will be automatically allocated. Refer to the chapter
.
•
Network management
Set Ethernet parameters. Refer to the chapter
User Manual
