57
C
Cllo
oc
ckk
S
So
ou
urrc
ce
e
D
De
essc
crriip
pttiio
on
nss
User define
User can manually set the current system time and time zone in the
following two manners:
•
Select "Use PC time" to synchronize the time of the Logger4000
with the time of the PC.
•
Click the "Time zone" pull-down-list and select the local time zone.
Enter the "Date" and "Time" and click "Save" to manually set the
time of the Logger4000.
It is recommended to select "User define" during debugging.
NTP
When the clock source is set to "NTP", time of all devices can be
synchronized. Click the "Time zone" pull-down-list and select the local
time zone. Fill in the domain, set the time interval, and click "Save". In
this way, the time of the Logger4000 is synchronized with the time of
the server.
IEC104
In this way, the Logger4000 and the background must use the IEC104
communication protocol, and otherwise, this manner is invalid.
iSolarCloud
Ensure that Logger4000 is connected to iSolarCloud. Otherwise,
setting the clock source to iSolarCloud is invalid.
MODBUS-
TCP
Ensure that Logger4000 and the background use MODBUS-TCP
communication protocol. Otherwise, setting the clock source to
MODBUS-TCP is invalid.
It is recommended that the top priority should be given to the IEC104 and then the
iSolarCloud.
-- -- E
En
nd
d
Set the system time when using the Logger4000 for the first time.
9.9.9 Forwarding Configuration
step 1
Click "System" -> "Transfer configuration" to enter the corresponding interface.
step 2
Click the button
to modify the forwarding configuration information of iSolarCloud.
-- -- E
En
nd
d
The default iSolarCloud station is "Chinese Server". Users in mainland China
select "Chinese Server", users in Europe select "European Server", and users
in other regions select the "International Server".
9.9.10 IEC104
Configure the IEC104 forwarding service for the Logger4000 on this interface.
User Manual
