49
step 2
Ensure that the connectors are securely in place.
-- -- E
En
nd
d
6.9.2 Connecting the CAN Cable
The CAN cable enables the communication between the inverter and the Li-ion battery
from SUNGROW and BYD.
•
Pin terminal connection
Refer to the section
for details. Plug the wires into the H
H and L
L
terminals according the labels on the bottom of the inverter.
•
RJ45 connection
Refer to the section
for details. Plug the wires into the R
RJJ4
45
5–
–
C
CA
AN
N terminal on the bottom of the inverter.
6.9.3 Connecting the Enable Cable
The Enable cable along with the RS485 cable, are used for communication between the
inverter and the Li-ion battery from LG Chem.
For detailed connection description of the RS485 cable, refer to the section
.
For detailed connection description of the Enable cable, refer to the section
. Plug the wires into the E
EN
N_
_H
H and E
EN
N_
_G
G terminals according the labels on
the bottom of the inverter.
6.10 WiNet-S Connection
The WiNet-S module supports Ethernet communication and WLAN communication. It is
not recommended to use both communication methods at the same time.
For details, see the quick guide for the WiNet-S module. Scan the following QR code for
the quick guide.
User Manual
