User Manual
26
e)
The documents include the Quick User Manual, quality certificates,
packaging list and product test reports.
4.3 Inverter Storage
Proper storage is required if the inverter is not installed immediately.
Store the inverter in the original packing case with the desiccant inside.
The storage temperature should be always between -30°C and +85°C, and
the storage relative humidity should be always between 0 and 100 %.
In case of stacking storage, the number of stacking layers should never
exceed the limit marked on the outer side of the packing case (5 layers for
SH5K-20).
The packaging must be upright.
If the inverter has been stored more than half a year, the qualified personnel
should thoroughly check and test it before installation.
The following figure shows the storage of the inverter.
Fig. 4-3
Example of Inverter Storage
