SAFETY INFORMATION
ASSEMBLY
PREPARATION
Before beginning assembly of this appliance, make sure all parts are present. Compare all parts with package
contents list and hardware as listed on pages 3 and 4 of this manual. If any part is missing or damaged, do not
attempt to assemble this product. Contact customer service for replacement parts.
ESTIMATED ASSEMBLY TIME
:
60 minutes
Tools Required for Assembly (NOT included):
7/16" open-end wrench
Philips screwdriver with medium blade
Adjustable opening wrench
Leak Test Solution (see instructions on page 11 on how to make solution.)
- 6 -
ATTACHING ANCHORING ARM
Attach 1 anchoring arm to base with 2 screws and nuts
as shown (repeat with the other 2 anchoring arms so
all 3 are attached to base).
To anchor heater to ground, insert anchoring pins
through anchoring arms and directly into ground as shown.
