background image

www.sunheater.com

3

3

HOW SUNHEATER WORKS

• The pool pump circulates the

water through the collectors.

• The collectors absorb the heat

from the sun.

• Warm water is returned to

the pool.

SUNHEATER collectors have a web construction designed for
maximum heat absorption regardless of the position of the sun.

Collector Cross Section

SIZING GUIDES

ABOVEGROUND POOLS

Round

Oval

S12

2

0U

S2

22

0U

Up to 24'

Up to 15' x 30'

1 Box

1 Box*

Up to 33'

Up to 21' x 41'

2 Boxes

1 Box

*The S240U can be used  but only a S140U is required. 

INGROUND POOLS

Dimensions

S12

2

0U

S2

22

0U

Kits

Up to 15' x 30'

4 Boxes

2 Boxes

1 SK22U

Up to 16' x 36' 

6 Boxes

3 Boxes

1 SK22U

Up to 20' x 40'

8 Boxes

4 Boxes

1 SK22U

S12

2

0U

Item

Description

Qty

A

1.5" Stainless Steel Hose Clamp

2

A

1.25" Stainless Steel Hose Clamp

2

B

3.75" Rubber Hose Connector

1

C

PVC Elbow Connector

2

D

PVC End Cap

2

E

Teflon Tape

1

S2

22

0U

Item

Description

Qty

A

1.5" Stainless Steel Hose Clamp

4

A

1.25" Stainless Steel Hose Clamp

2

B

3.75" Rubber Hose Connector

2

C

PVC Elbow Connector

2

D

PVC End Cap

4

E

Teflon Tape

1

Note: An extra rubber hose has been supplied to connect
additional SunHeater systems.

A

B

C

D

E

INSTALLATION

TOOLS REQUIRED

• Flathead screwdriver or 5/16” (8mm) nut driver
• Plug for return fitting
• For roof or rack mounting:

o Power drill
o 1/8” (3mm) drill bit
o #2 Phillips head drill bit
o Silicone sealant (GEII or equivalent)

GUIDELINES FOR POSITIONING THE COLLECTOR

• The collector(s) needs at least 6 hours of full sunlight daily.
• For ground installation, ensure the area is free of sharp objects prior

to installation.

• A 1hp pump will handle installations up to 30ft from the pool

equipment and a height of 1 story.

• The collector(s) can be installed on the ground, a roof, a rack or a fence.

Additional plumbing and hardware kits may be required (not included).

READ THE ENTIRE MANUAL PRIOR TO THE INSTALLATION AND USE OF THE SUNHEATER SYSTEM.

LIST OF COMPONENTS

Use Sunheater Liquid Heatshield to hold in heat at night and

during cool weather.  See www.sunheater.com.

Summary of Contents for S1220U









Reviews: