10
8. If you do not use the heater for a long time, please take out the remote batteries (to prevent
corrosion ) as shown below. Store the remote in a safe place.
STORAGE
Store the heater in a cool, dry location when not in use. To prevent dust and dirt build-up, use the
original packaging to repack the unit.
BASIC TROUBLESHOOTING
If the heater will not operate, please check the following before seeking repair advice:
1.
Check if the power cord is plugged into an electrical outlet, if not, plug in.
2.
Check if electricity to the main power switch (in the back) is working.
3.
Check to see if the battery on the remote is placed correctly, undamaged.
NOTE: For the heater to function properly, the desired temperature on the heater must be
set a few degrees higher than the temperature in the room. If the unit seems to not be
heating, increase the desired temperature on the heater to engage the heat elements.
PUSH
lid
Battery
1) Remove bracket screws (2X)
