9
will be locked for use.
And
When you need to unlock it, press Temp Up and Temp
Down buttons at the same time for 3 seconds. You will hear
a beep. The control panel and remote control will become
functional again.
6
、
Select fan function mode
Or
Select the fan function mode by selecting the “Fan” button
on the heater’s control panel or the remote control.
MAINTENANCE
1.
Turn off the power switch in the rear of the unit.
2.
Unplug the unit and let it cool completely.
3.
To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You
may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth.
CAUTION: DO NOT let liquid enter the heater.
4.
DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to
clean the heater. This may cause damage or deterioration to the surface of the heater.
5.
DO NOT immerse the heater in water.
6.
Wait until the unit is completely dry before use.
7.
For optimal performance we recommend that the filter be cleaned monthly. Please take
off the filter with the 2 steps in the drawing below. Flush and clean the filter with water,
Then, dry it out and re-assemble.
3) Remove Air filter
The unit
2) Remove filter bracket
