3
1
Getting to Know Your Access Point
1.1 About the Wireless Access Point
WAP-5002/WAP-5002P is a reliable IEEE802.11b/g WLAN with 2 ports LAN Access Point. It can be configured to
operate in AP/Bridge/Repeater mode. You can configure WAP-5002/WAP-5002P by Window Utility or WEB
interfaces via LAN port or WLAN interface. WAP-5002/WAP-5002P provides dual Ethernet ports in switch mode, so
you can use Daisy Chain to reduce the usage of Ethernet switch ports. WAP-5002P also provides PD feature on
ETH2 which is fully compliant with IEEE802.3af PoE specifications. Therefore, these wireless access points are best
communication solution for industrial grade wireless application.
1.2 Software Features
High Speed Air Connectivity: WLAN interface support up to 54Mbps link speed connection
Highly Secured Tranimission: WEP/WPA/WPA2/802.1X/Radius/TKIP supported
Support AP/Bridge/Repeater Mode
Switch Mode Supported: Daisy Chain support to reduce usage of switch ports
Secured Management by HTTPS and SSH
Event Warning by Syslog, Email, SNMP Trap, Relay and Beeper
1.3 Hardware Features
Fully Compliant with IEEE802.3af (Power Device at ETH2, WAP-5002P only)
Redundant Power Inputs: 12~48 VDC on terminal block
Operating Temperature: -10 to 55
o
C
Storage Temperature: -20 to 85
o
C
Operating Humidity: 5% to 95%, non-condensing
Casing:
IP-30
10/100Base-T(X) Ethernet port
Dimensions(W x D x H) : 52 mm(W)x 106 mm( D )x 144 mm(H)