background image

2

Training

•  Read, understand, and follow all instructions on the 

cordless cultivator and in the manual before 

operating this unit. Thoroughly familiarize yourself with the 

controls and the proper use of the equipment. Know how to 

stop the unit and disengage the controls quickly.

•  Children should never be allowed access to the equipment. 

Adults should never operate the equipment without carefully 

reading and understanding these instructions.

•  Keep the area of operation clear of all persons,  

particularly children or pets.

•  Exercise caution to avoid slipping or falling.
•  Always plan your cultivating path to avoid discharge of 

material toward people, pets, and property (e.g. windows, 

cars, etc.). Thrown objects can cause serious personal 

injury and property damage. Do not allow anyone in front of 

a running machine.

•  Keep people, pets, and property at least 25 feet from the 

cordless cultivator while it is in operation.  

Stop the cordless cultivator if people or pets enter 

the discharge area.

•  Always observe the surface conditions in order to avoid 

slipping, falling, and unexpected objects.

Preparation

•  Always inspect the area where the  cultivator is to 

be used. Remove all objects (i.e. stones, sticks, wires, and 

other foreign materials) that could be thrown by the blades 

or cause the operator to trip.

•  Thrown objects can cause serious injury to the eyes and 

exposed body. Always wear safety glasses or eye shields 

during operation and while making an adjustment or repair.

•  Always operate the cordless cultivator wearing 

adequate garments. Do not wear jewelry or other loose 

clothing, which could become entangled in moving parts. 

Wear non-slip footwear to ensure proper footing.

•  Observe any noise-prevention regulations and laws.
•  Inspect the cordless cultivator for worn, missing,  

or damaged parts and safety labels. See maintenance 

section for detailed instructions.

Operation

•  Do not operate the machine while under the influence of 

alcohol or drugs.

•  Keep all safety devices in place and in proper working order. 

Do not operate with missing or damaged components.

•  Ensure the controls (start/stop) function properly before 

cultivating.

•  Hold onto the cordless cultivator with both hands 

during operation. Ensure the grips are dry.

•  Contact with rotating parts can amputate hands and feet. 

Keep hands and feet away from all rotating parts.

•  Only operate the cordless cultivator when there is 

good visibility or light and dry conditions. Always watch 

your footing and keep a firm hold on the grips.  

Walk; don't run!

•  Do not operate the cordless cultivator on slippery 

surfaces. Check your footing during use.

•  Exercise caution when changing direction and operating the 

tool on slopes. Always keep feet and legs a safe distance 

away from the machine. Look for hidden obstacles or hazards.

•  Do not overload machine capacity by attempting to 

cultivate too deeply. It will cause excessive resistance.

•  Stop the cordless cultivator and remove the battery 

before leaving the operating position (behind the handles)  

to adjust or inspect the unit. Wait until the blades have 

come to a complete stop.

•  If the cordless cultivator should start to vibrate 

abnormally, stop the machine and inspect thoroughly for 

damage.

•  Turn the machine OFF when moving to a new work area. 

Allow the blades to completely stop rotating before 

transporting the unit.

•  Always use proper care and good judgment when you 

are confronted with a situation that is not covered in 

this manual. If you are unsure of what to do, contact 

your authorized Snow Joe

®

 + Sun Joe

®

 dealer or call 

the Snow Joe

®

 + Sun Joe

®

 customer service center at 

1-866-SNOWJOE (1-866-766-9563).

•  Do not use in rain or wet conditions.
•  Do not grasp the exposed cutting blades or cutting edges 

when picking up or holding the appliance. 

Stopping Work

•  Always turn the cordless cultivator OFF and remove 

the battery when stopping work or when changing work 

areas. Never leave the machine running when unattended.

•  The blades will continue to rotate for a short period after 

turning OFF the cordless cultivator. Wait until the 

blades have completely stopped before lifting the machine 

or conducting inspection and maintenance.

•  The motor housing remains hot for a short period after the 

machine is turned OFF. Allow the motor housing to cool 

completely before touching or storing near combustible 

material.

Maint Storage

•  Maintain or replace safety and instruction labels.
•  Disengage all controls, stop the engine, and wait until the 

blades come to a complete stop before cleaning, repairing, 

or inspecting the cultivator.

Summary of Contents for 24V-TLR-LTE-RM





















Reviews: