background image

6

Know Your Electric Lawn Dethatcher

Read the owner’s manual and safety instructions carefully before operating the dethatcher. Compare the illustration below to the 

dethatcher in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future 

reference and reread it prior to each dethatching session.

1.  Switch bar lever
2.  Safety lock button
3.  Extension cord restraint holder
4.  Cable clip (2)
5.  Appliance cord
6.  Rear wheel (2)
7.  Front wheel (2)
8.  Upper handle
9.  Upper handle knob and bolt (2)

10. Middle handle bar (2)
11. Lower handle knob and bolt (2)
12. Lower handle
13. Motor housing
14. Raking depth control knob

Technical Data

Rated Voltage ..............................................

120 V ~ 60 Hz

Motor ...........................................................11 amp
No Load Speed ...........................................

4,600 rpm

Rotor ............................................................24 spring steel tines
Raking Width ...............................................14 in. (35.6 cm)

Raking Depth*.............................................. -0.12 in. to 0.35 in. 

 

 

(-3 mm to 9 mm)

Wheel Size................................................... 7.8 in. (20 cm) front 

 

 

4 in. (10 cm) rear

Weight.......................................................... 22.7 lbs (10.28 kg) 

2

6

7

3

10

13

14

12

11

9

8

4

5

1

*Note: The negative raking depth indicates that the tines are raking below the horizon (i.e. penetrating the soil layer).

Summary of Contents for AJ799E-RM

















Reviews: