sunjoe AJ799E-RM, Operator'S Manual

7

Unpacking

Carton Contents

•  Dethatcher housing
•  Upper handle bar assembly
•  Middle handle bar (2)
•  Lower handle
•  Extension cord restraint holder
•  Cable clip (2)
•  Manual with registration card

Mounting Accessories

•  Phillips screws (2)
•  Handle knobs and bolts (4)

1.  Carefully remove the dethatcher and all other items from 

the shipping carton.

2.  Check that all the items in the above list are supplied.
3.  Inspect the product carefully to make sure no breakage or 

damage occurred during shipping. If you find damaged or 

missing parts, DO NOT return the unit to the store. Please 

call 1-866-766-9563.

  NOTE: Do not discard the shipping carton and packaging 

material until you are ready to use your new electric 

dethatcher.

Assembly

Carefully follow the instructions below to assemble your  

AJ799E-RM electric dethatcher.
NOTE: The packaging is made of recyclable materials. 

Properly dispose of these materials in accordance with 

regulations.

m

WARNING!

 Do not connect the dethatcher to the power 

supply until assembly is complete. Failure to comply could 

result in accidental starting and severe personal injury.

Connecting the Handle Bars

1.  Insert the lower handle into the motor housing and secure 

it with the two Phillips screws (Fig. 1).

2.  Secure the two middle handle bars to the lower handle 

using the first set of knobs and bolts (A). Tighten the 

knobs on each side to ensure a secure fit

 (Fig. 2).

3. 

Hang the cable

 relief holder on the upper handle (Fig. 2).

4.  Connect the upper handle to the middle handle bars using 

the second set of knobs and bolts (B). Tighten the knobs 

on each side to ensure a secure fit (Fig. 2).

  NOTE: The two middle handle bars can be secured in two 

positions depending on your height preference.

Fig. 1

Phillips screw

Lower handle

Fig. 2

Upper handle

Height 

adjustment 

holes 

Middle handle bar

Cable relief 

holder

Lower 

handle

B

A