background image

14

•  When crossing any graveled surfaces, release the switch 

bar lever to turn off the mower. The stones can be picked 

up and thrown by the rotating blade.

•  Set the mower to the highest cutting height when mowing 

on uneven ground or in tall weeds. 

m

WARNING! 

If you strike a foreign object, stop the motor 

and remove the safety key.  Thoroughly inspect the mower and 

repair any damage before resuming work.

• 

IMPORTANT!

 Never open the ejector flap when the grass 

bag has been detached (to be emptied) and the motor is 

still running. A rotating blade can cause serious injuries!

•  Always carefully fasten the ejector flap and grass bag. 

Switch off the motor before emptying the grass bag. 

Always ensure that a safe distance (provided by the length 

of the long handles) is maintained between the user and 

the mower housing. Be especially careful when mowing 

and changing direction on slopes and inclines.

•  Maintain a solid footing and wear sturdy, non-slip footwear 

and long trousers. Always mow across an incline (not up 

and down). 

•  For safety reasons, the lawn mower may not be used to 

mow inclines with gradients exceeding 15 degrees.

•  Use special caution when backing up and pulling the lawn 

mower towards you as such maneuvering of the machine 

poses a tripping hazard.

Cleaning, Maintenance, and 

Ordering Spare Parts

m

WARNING!

 

Before cleaning, repairing, inspecting or 

carrying out any other maintenance work, ensure that the blade 

is not rotating and that the safety key has been disconnected.

Cleaning

•  Keep all safety devices, air vents, and the motor housing 

free of dirt and dust as best as possible.

•  Wipe the equipment with a clean cloth or blow it with 

compressed air at low pressure.

•  Clean the equipment immediately after use with a damp 

cloth and some soft, non-abrasive soap. Do not use 

cleaning agents or harsh solvents; these may damage 

the plastic parts in the equipment. Ensure that no water 

penetrates the equipment's interior.

•  Do not clean the lawn mower with running water, 

particularly with high-pressure water.

•  Keep the handles dry, clean, and free of oil and grease.
•  At the end of the season, perform a general inspection 

of the lawn mower and remove any grass, dirt, or other 

debris that may have accumulated.

•  At the start of each season, check the condition of the 

mower blade. If repairs are necessary, please call the 

Snow Joe

®

 + Sun Joe

®

 customer service center for 

assistance at 1-866-SNOWJOE (1-866-766-9563).

Servicing

•  Ensure that all mounting components (i.e. screws, bolts, 

nuts, etc.) are always tightened so that the equipment can 

be safely operated at all times.

•  Frequently inspect the grass bag assembly for signs of 

wear and replace immediately with a genuine Snow Joe

®

 + 

Sun Joe

®

 part if damage is found.

•  Replace excessively worn or damaged parts immediately.
•  To maximize your mower's longevity, all screwed parts, 

including the wheels and axles, should be cleaned and 

lubricated.

•  There are no parts inside the equipment which require 

additional maintenance or lubrication.

Replacing the Mower Blade

NOTE: The mower blade is sharp and can cause severe 

personal injury if handled incorrectly. Wrap the blade or wear 

protective gloves, and use extra caution when servicing.

•  The cutting component is subjected to more wear and tear 

than any other component of the unit. Therefore, routinely 

check the condition of the blade and make sure that it is 

tightly fastened. If the blade is completely worn, it must be 

immediately replaced or resharpened.

•  An excessively vibrating mower indicates that the blade 

is not properly balanced or has become deformed from 

striking an object. In this case, the blade must be repaired 

or replaced.

•  For safety reasons, we recommend having the blade 

replaced or resharpened by an authorized Snow Joe

®

 + 

Sun Joe

®

 dealer.

Ordering Replacement Parts

When servicing the mower, use only genuine replacement parts 

that are available from the manufacturer. In order to obtain 

replacement parts, visit our website at snowjoe.com or call 

our toll-free customer service helpline at 1-866-SNOWJOE (1-

866-766-9563). The use of parts that do not meet the original 

equipment specifications may lead to improper performance 

of the lawn mower, may compromise operator safety, and will 

void the manufacturer's warranty.

Summary of Contents for iON16LM-CT





















Reviews: