sunjoe iON16LM, Operator'S Manual

16

Troubleshooting

IMPORTANT!

 For protection, the motor is equipped with a thermal switch that cuts out when the motor is overloaded and 

switches on again automatically after a short cooling period.

Motor does not start

Motor performance 

drops

Unclean cuts

a)

  Capacitor defective

b)

  Battery pack empty

c)

  Cable defective

d)

  Switch/plug block defective

e)

  Motor terminals or capacitor 

disconnected

f)

  Mower standing in high grass

g)

  Mower housing is clogged

h)

  Safety key is not inserted

i)

  Battery is not correctly inserted

a)

  Contact an authorized service center

b)

  Charge battery pack

c)

  Check the cable

d)

  Contact an authorized service center

e)

  Contact an authorized service center

f)

  Start motor on shorter grass or 

previously mowed area; change 

cutting height if necessary

g)

  Clean housing so that the blade can 

run freely

h)

  Insert safety key (Fig. 13)

i)

  Remove the battery and reinsert

a)

  Grass too tall or damp

b)

  Mower housing is clogged

c)

  Blades badly worn

d)

  Battery performance decreasing

a)

  Correct the cutting height

b)

  Clean housing

c)

  Replace blades

d)

  Check the battery performance and 

charge the battery if necessary

a)

  Blades worn

b)

  Wrong cutting height

a)

  Replace or resharpen the blade; contact 

an authorized service center

b)

  Correct the cutting height

Fault

Possible Cause

Remedy