background image

© 2020 by Snow Joe

®

, LLC

All rights reserved. Original instructions.

SAVE THESE INSTRUCTIONS

A Division of Snow Joe

®

, LLC

OPERATOR’S MANUAL

Model LJ602E

Form No. SJ-LJ602E-880E-MR2

R

ELECTRIC LOG SPLITTER

15 AMP | HYDRAULIC | 5 TON

1

IMPORTANT!

Safety Instructions
All Operators Must Read These 

Instructions Before Use

Always follow these safety guidelines. Failure to do so may 

result in serious bodily injury or death.

General Safety Warnings!

When using the log splitter, basic safety precautions should 

always be followed to reduce the risk of fire, electric shock, 

and personal injury, including the following:

m

WARNING!

 The use of any other accessory or 

attachment might increase the risk of injury.

TRAINING

Before using the log splitter, take the time to familiarize 

yourself with the controls, especially how to stop the log 

splitter in an emergency. Only individuals who have read these 

instructions and have a thorough understanding of these 

instructions shall operate the log splitter. Never allow children 

to operate the log splitter.
Retain this manual for future reference and reread it at the start 

of each log splitting season.

1.  Read, understand, and follow all instructions on the 

log splitter and in the manual(s) before attempting to 

assemble and operate. Save this manual for reference and 

ordering replacement parts.

2.  Never allow children under 18 years old to operate this 

machine. Children 18 years old and over should be 

trained and supervised by an adult who understands the 

operation of the log splitter.

3.  Never allow an untrained individual to operate the  

log splitter.

4.  Understand the function of all the controls and their 

proper operation. Know how to stop the machine in case 

of emergency.

PREPARATION

Work Area

1.  Plan your log splitting pattern to avoid discharge of 

material toward people, pets, and property. Thrown 

objects can cause serious personal injury.

2.  Always inspect the area where the log splitter is to  

be used. Ensure the surface the machine is on is  

23.6 inch – 29.5 inch (60 cm – 75 cm) high, stable, level 

and free from overhanging items such as limbs, wires etc.

3.  All visitors: children, adults, and pets, should be kept at a 

distance from working area, at least 16.5 ft. (5 m) from the 

log splitter while it is in operation. Stop the log splitter if 

people or pets enter the discharge area.

4.  Always observe the surface conditions to avoid slipping, 

falling, and unexpected objects.

5.  Avoid Dangerous Environments – Don’t use appliances in 

damp or wet locations. Do not operate the log splitter in 

the rain or wet conditions.

6.  Operation of the log splitter where temperatures  

are below 41ºF (5ºC) or above 104ºF (40ºC), at a high  

altitude and/or high humidity may result in a malfunction 

of the machine. Do not use the log splitter in poor 

environmental conditions.

7.  Ensure electrical conditions meet requirements (see 

Electric Safety).

8.  Do not use the machine where gasoline, natural gas or 

other flammable vapors are present. The electric motor 

may spark and cause an explosion or fire.

Protective Clothing

1.  Thrown objects can cause serious injury to the eyes and 

exposed body. Always wear safety glasses or eye shields 

during operation and while performing an adjustment or 

repair. Always use face or dust mask if operation is dusty.

2.  Use of rubber gloves and substantial footwear is 

recommended when working outdoors. Wear protective 

hair covering to contain long hair.

3.  Always operate wearing adequate protective garments. 

Dress Properly – Do not wear jewelry or other loose 

clothing, which could become entangled in moving parts. 

Wear footwear that provides protection for the feet and 

ensures sure footing.

4.  Always use ear protection if the noise level exceeds 85 

dB. Observe any noise prevention regulations and laws.

5.  Inspect the log splitter for worn, missing or damaged 

parts and safety labels. See maintenance section for 

detailed instructions.

6.  Use the Right Appliance – Do not use this appliance for 

any job except that for which it is intended.

Wood Condition

1.  Do not split oversized logs (max. log diameter: 10 inch, 

max log length: 20.5 inch). Do not attempt to split “hard” 

wood that requires more than 5 seconds to split.

Summary of Contents for LJ602E













Reviews: